Hook a camper to a lifted pickup with the wrong ball mount and you see the problem from across the parking lot: the trailer tongue points at the sky, the rear axle carries too much weight and the front axle too little. On the highway that shows up as sway, light steering and brakes that do not bite the way they should. A heavy duty trailer hitch with an adjustable drop fixes it by putting the ball at the height your trailer needs, so the rig sits level.
This guide covers five VEVOR adjustable ball mount hitches for 2 inch and 2.5 inch receivers, from a 6 inch drop mount for stock-height trucks to a 10 inch drop mount for lifted ones. Each has two or three ball sizes on one shank, so one hitch can pull a utility trailer, a boat and a camper. We will add more brands to this page as we review them.
For each hitch you get the receiver size, drop and rise, the towing rating for each ball, the weight and one honest drawback. Below the reviews there is a guide to measuring drop, matching ratings to your receiver and truck, and the checks to do before every trip. One rule runs through all of it: your rig is only as strong as its lowest rated part.
Our Quick Picks
Best Overall Heavy Duty Trailer Hitch

VEVOR 2.5 in Receiver Hitch, 8 in Drop, 28,000 lbs GTW
2.5 in · 2 in, 2-5/16 in · 20,000 / 28,000 lbs
Check Price at VEVORRead the reviewBest for Lifted Trucks

VEVOR 2.5 in Receiver Hitch, 10 in Drop, Dual Ball
2.5 in · 2 in, 2-5/16 in · 15,000 / 18,500 lbs
Check Price at VEVORRead the reviewBest for 2 Inch Receivers

VEVOR 2 in Receiver Hitch, 8 in Drop, Dual Ball
2 in · 2 in, 2-5/16 in · 8,000 / 18,500 lbs
Check Price at VEVORRead the reviewBest Tri-Ball Hitch for Mixed Trailers: VEVOR 2 in Tri-Ball Hitch, 8 in DropBest for Stock-Height Trucks and SUVs: VEVOR 2 in Tri-Ball Hitch, 6 in DropCompare all 5 side by side
Best Heavy Duty Trailer Hitches: Full Reviews

At a glance
- Receiver
- 2.5 in
- Balls
- 2 in, 2-5/16 in
- Rated GTW
- 20,000 / 28,000 lbs
- Drop
- Up to 8 in, 11 holes
1. VEVOR 2.5 in Receiver Hitch, 8 in Drop, 28,000 lbs GTW: Best Overall Heavy Duty Trailer Hitch
For a three-quarter or one-ton truck with a 2.5 inch receiver, this is the ball mount we would start with. VEVOR rates the 2-5/16 inch ball at 28,000 lbs gross trailer weight and the 2 inch ball at 20,000 lbs, which is more than nearly any bumper-pull trailer you will hook to a pickup. In practice that means the ball mount is unlikely to be the weak link; your receiver and your truck’s towing rating will be.
The shank and vertical bar are powder coated carbon steel, with zinc plated pins and a keyed lock. There are 11 adjustment holes giving up to 8 inches of drop, enough to level most trailers behind a stock or leveled heavy duty truck. Both balls are on one rotating head, so switching from a 2 inch boat trailer to a 2-5/16 inch equipment trailer takes a minute. It weighs 23.8 lbs and measures 13.8 x 12.0 x 3.0 inches.
Two cautions. VEVOR confirms the balls are welded and cannot be replaced, so you cannot swap in a weight distribution ball. And a hitch is only as secure as its pin: whatever hitch you use, check that the pin is fully seated and the lock or clip is engaged before every trip, and run safety chains crossed under the coupler.
Key Features
- Fits 2.5 in receivers
- 2-5/16 in ball rated 28,000 lbs GTW, 2 in ball rated 20,000 lbs GTW
- 11 holes, up to 8 in drop
- Powder coated carbon steel, zinc plated pins
- Keyed lock with two keys
- Welded balls, not replaceable
- 23.8 lbs, 13.8 x 12.0 x 3.0 in
What We Like
- Highest rating on this page by a wide margin
- Two common ball sizes on one head
- Enough drop for most heavy duty pickups
- Lock helps prevent theft
- Solid steel construction
What We Don’t Like
- The balls are welded on, so a worn ball means replacing the whole head, and no weight distribution ball can be fitted.
Overall
The best all-round choice for heavy duty trucks with 2.5 inch receivers. Its ratings leave plenty of margin, as long as you remember the receiver and truck set your real limit.
VEVOR Black Friday Pre-Sale
Up to 50% off, plus an extra 8% with code VVOTD (Nov 9 to Nov 18).

At a glance
- Receiver
- 2.5 in
- Balls
- 2 in, 2-5/16 in
- Rated GTW
- 15,000 / 18,500 lbs
- Drop
- Up to 10 in, 13 holes
2. VEVOR 2.5 in Receiver Hitch, 10 in Drop, Dual Ball: Best for Lifted Trucks
Lift kits make towing harder. A 4 to 6 inch lift on a full-size truck can put the receiver 25 inches or more off the ground, while most trailers want the ball at about 17 to 19 inches. This mount gives you up to 10 inches of drop across 13 adjustment holes, the most on this page, so you can bring the ball down to where the trailer sits level.
VEVOR rates the 2-5/16 inch ball at 18,500 lbs and the 2 inch ball at 15,000 lbs. The construction matches our top pick: powder coated carbon steel, zinc plated pins, an e-coated lock with two keys and a rotating dual ball head. VEVOR lists 17 mm adjustment holes. It weighs 24.7 lbs and measures 13.8 x 14.0 x 3.0 inches.
Long drop mounts have a trade-off. The further the ball sits below the receiver, the more leverage the trailer tongue has on the receiver. Keep tongue weight within your receiver’s rating, avoid hard impacts on steep driveways, and do not leave the long bar in the receiver when you are not towing, where it will catch on curbs and ramps.
Key Features
- Fits 2.5 in receivers
- 2-5/16 in ball rated 18,500 lbs GTW, 2 in ball rated 15,000 lbs GTW
- 13 holes, up to 10 in drop
- Powder coated carbon steel, zinc plated pins
- Keyed lock with two keys
- 17 mm adjustment holes
- 24.7 lbs, 13.8 x 14.0 x 3.0 in
What We Like
- Most drop of any hitch here
- Fine height steps with 13 holes
- Two ball sizes on one head
- Lock included
- Same tough steel build as the 28,000 lb model
What We Don’t Like
- The long bar sits low when you are not towing, so it is best removed between trips.
Overall
The one to buy for lifted trucks and tall 4x4s that need serious drop to tow level. For a stock heavy duty truck, the 8 inch model above has higher ratings.

At a glance
- Receiver
- 2 in
- Balls
- 2 in, 2-5/16 in
- Rated GTW
- 8,000 / 18,500 lbs
- Drop
- Up to 8 in, 11 holes
3. VEVOR 2 in Receiver Hitch, 8 in Drop, Dual Ball: Best for 2 Inch Receivers
Most half-ton pickups and SUVs have a 2 inch receiver, and this is the same steel design scaled to fit it. It offers 11 adjustment holes and up to 8 inches of drop, a rotating head with 2 inch and 2-5/16 inch balls, powder coated carbon steel and a keyed lock.
VEVOR rates the 2-5/16 inch ball at 18,500 lbs and the 2 inch ball at 8,000 lbs. Read those numbers carefully. The ball mount may be rated that high, but 2 inch receivers are usually Class III or Class IV, typically rated somewhere around 6,000 to 12,000 lbs depending on the truck. The sticker on your receiver and the towing capacity in your owner’s manual decide what you can actually pull, not the ball mount.
Expect it to weigh roughly 16 to 23 lbs. Like the 2.5 inch versions, it is a solid, adjustable mount that covers most boat, utility and camper trailers behind a half-ton truck.
Key Features
- Fits 2 in receivers
- 2-5/16 in ball rated 18,500 lbs GTW, 2 in ball rated 8,000 lbs GTW
- 11 holes, up to 8 in drop
- Powder coated carbon steel, zinc plated pins
- Keyed lock
- Rotating dual ball head
- Listed weight 22.7 lbs (also given as 7.2 kg)
What We Like
- Brings heavy duty adjustability to 2 inch receivers
- 8 inches of drop suits most half-ton trucks and SUVs
- Two ball sizes on one head
- Lock included
- Ratings well above most 2 inch receivers
What We Don’t Like
- Its high rating can tempt buyers to overlook their receiver’s lower limit.
Overall
The right pick for half-ton pickups and SUVs with 2 inch receivers. Just tow to your receiver’s and vehicle’s ratings, not the ball mount’s.

At a glance
- Receiver
- 2 in
- Balls
- 1-7/8, 2, 2-5/16 in
- Rated GTW
- 15,000 lbs (2-5/16 in)
- Drop
- Up to 8 in, 9 holes
4. VEVOR 2 in Tri-Ball Hitch, 8 in Drop: Best Tri-Ball Hitch for Mixed Trailers
If you tow a little of everything, from a small 1-7/8 inch utility trailer to a 2 inch boat trailer and a 2-5/16 inch camper, a tri-ball mount saves you a box of ball mounts. This VEVOR model fits 2 inch receivers and offers all three sizes, with up to 8 inches of drop or rise across 9 adjustment holes.
It is built differently from the black steel mounts above, with a silver aluminum alloy body and carbon steel parts, and it weighs 20.1 lbs. It comes with pin locks, and the product photo shows two balls on the head and the third as a separate piece. VEVOR coats the hitch and balls with an anti-rust layer. Dimensions are 12.2 x 7.9 x 13.7 inches.
VEVOR only gives a rating for the 2-5/16 inch ball: 15,000 lbs. It does not list ratings for the 1-7/8 or 2 inch balls, and smaller balls are always rated lower, so use the 1-7/8 inch ball only for light utility trailers. A stronger aftermarket locking pin is worth considering for any hitch you rely on.
Key Features
- Fits 2 in receivers
- 1-7/8, 2 and 2-5/16 in balls
- 2-5/16 in ball rated 15,000 lbs (others not listed)
- 9 holes, up to 8 in drop or rise
- Aluminum alloy and carbon steel
- Pin locks included
- 20.1 lbs, 12.2 x 7.9 x 13.7 in
What We Like
- Three ball sizes cover nearly every bumper-pull trailer
- Works as a drop or a rise
- Lighter than the steel mounts
- Corrosion-resistant finish
- Locks included
What We Don’t Like
- Only the largest ball has a published rating, so the smaller balls’ limits are a guess.
Overall
A practical choice for anyone who tows several different trailers with a 2 inch receiver. Treat the smaller balls as light duty and check the locking pin often.

At a glance
- Receiver
- 2 in
- Balls
- 1-7/8, 2, 2-5/16 in
- Rated GTW
- 8,000 / 10,000 / 15,000 lbs
- Drop
- Up to 6 in, 7 holes
5. VEVOR 2 in Tri-Ball Hitch, 6 in Drop: Best for Stock-Height Trucks and SUVs
Not every truck needs a long drop. On many stock-height half-ton pickups and SUVs, the ball only needs to come down a few inches to level a trailer, and an 8 or 10 inch bar just hangs low and catches on driveways. This compact tri-ball mount fits 2 inch receivers and gives up to 6 inches of drop or 6 inches of rise across 7 adjustment holes.
The head carries all three common ball sizes: 1-7/8, 2 and 2-5/16 inch. Unlike the 8 inch tri-ball above, this one has a rating for every ball. VEVOR rates the 2-5/16 inch ball at 15,000 lbs, the 2 inch ball at 10,000 lbs and the 1-7/8 inch ball at 8,000 lbs. As always, those are ball mount numbers; the receiver sticker and your owner’s manual set the real limit, and on most 2 inch receivers that limit is far lower.
The body is carbon steel and aluminum alloy with an anti-rust coating on the hitch and balls. It comes with pin locks, a pad that absorbs vibration and rattle in the receiver, and a glow-in-the-dark warning sticker. It weighs 18.7 lbs and measures 12.0 x 10.8 x 8.1 inches. It is made for 2 inch receivers only, so it is not the pick for a heavy duty truck with a 2.5 inch receiver.
Key Features
- Fits 2 in receivers only
- 1-7/8, 2 and 2-5/16 in balls
- Rated 15,000 lbs on the 2-5/16 in ball, 10,000 lbs on the 2 in, 8,000 lbs on the 1-7/8 in
- 7 holes, up to 6 in drop or rise
- Carbon steel and aluminum alloy, anti-rust coating
- Pin locks, anti-rattle pad, glow warning sticker
- 18.7 lbs, 12.0 x 10.8 x 8.1 in
What We Like
- Short bar does not hang low
- Lightest hitch here
- Published rating for every ball
- Three ball sizes on one head
- Works as a drop or a rise
What We Don’t Like
- It only fits 2 inch receivers and tops out at 6 inches of drop, so lifted trucks and 2.5 inch receivers need one of the other mounts.
Overall
The neat, compact choice for stock-height half-ton trucks and SUVs that tow more than one kind of trailer. If you need more drop, step up to the 8 inch tri-ball or the 2 inch, 8 inch dual ball model.
Side-by-Side Comparison
| Model | Receiver | Balls | Rated GTW | Drop | Weight | Price |
|---|---|---|---|---|---|---|
| VEVOR 2.5 in, 8 in Drop, Dual Ball | 2.5 in | 2 in, 2-5/16 in | 20,000 / 28,000 lbs | Up to 8 in, 11 holes | 23.8 lbs | Check price |
| VEVOR 2.5 in, 10 in Drop, Dual Ball | 2.5 in | 2 in, 2-5/16 in | 15,000 / 18,500 lbs | Up to 10 in, 13 holes | 24.7 lbs | Check price |
| VEVOR 2 in, 8 in Drop, Dual Ball | 2 in | 2 in, 2-5/16 in | 8,000 / 18,500 lbs | Up to 8 in, 11 holes | 22.7 lbs listed | Check price |
| VEVOR 2 in Tri-Ball, 8 in Drop | 2 in | 1-7/8, 2, 2-5/16 in | 15,000 lbs (2-5/16 in) | Up to 8 in, 9 holes | 20.1 lbs | Check price |
| VEVOR 2 in Tri-Ball, 6 in Drop | 2 in | 1-7/8, 2, 2-5/16 in | 8,000 / 10,000 / 15,000 lbs | Up to 6 in, 7 holes | 18.7 lbs | Check price |
Ratings are for the ball mount only. Your towing limit is set by the lowest rated part of the whole rig.
How to Choose a Heavy Duty Trailer Hitch
Measure the drop you need
Park the truck and trailer on level ground. Measure from the ground to the top inside edge of the receiver opening. Then level the trailer with its trailer jack and measure from the ground to the bottom of the coupler. The difference is your drop. If the receiver is higher than the coupler, you need a drop; if it is lower, flip the mount for a rise. Add about an inch if the truck squats under tongue weight, and pick a hitch whose range covers that number with a hole or two to spare.
Receiver size and class
Receivers come in 1.25, 2, 2.5 and 3 inch openings. A 2 inch receiver is usually Class III or IV, while 2.5 inch receivers are found on heavier trucks and are usually rated higher. The ball mount must match the opening exactly; adapters add play and leverage. The rating sticker on the receiver, plus the tow rating in your owner’s manual, set the real limit, so check both before choosing a ball mount.
The lowest rated part wins
A trailer connection is a chain: vehicle, receiver, ball mount, ball, coupler and safety chains. The whole system is only rated as high as its weakest link. A 28,000 lb ball mount does not let a half-ton truck tow 28,000 lbs. Match every part to the trailer’s loaded weight, and treat the ball mount’s high rating as margin, not permission.
Tongue weight
For a bumper-pull trailer, aim for a tongue weight of roughly 10 to 15 percent of the loaded trailer weight. Too little causes sway; too much overloads the rear axle and receiver. None of the ball mounts on this page has a separate tongue weight rating, so stay within your receiver’s tongue weight rating and, when in doubt, weigh the tongue with a tongue scale or a bathroom scale and lever. Load the trailer heavier at the front and secure cargo with heavy duty ratchet straps.
Ball size
Match the ball to the size stamped on the coupler: 1-7/8 inch for small utility trailers, 2 inch for most boats and campers, and 2-5/16 inch for heavier equipment and car haulers. A coupler on the wrong size ball can pop off over a bump. Dual and tri-ball mounts make it easy to switch, but always double check that the right ball is facing up before you couple.
Locks, pins and rattle
A locking hitch pin keeps the mount in the receiver and stops it from walking off when the truck is parked. Check the pin is fully through both sides and the lock or clip is engaged every time. Anti-rattle pads and clamps reduce clunking in the receiver, which also reduces wear on the pin.
Before Every Trip
Walk around the rig before you pull out. Confirm the coupler latch is closed and pinned, the hitch pin and lock are engaged, safety chains are crossed under the tongue and attached, the breakaway cable is connected, and the lights and brakes work. Raise the trailer jack fully and stow it. Look at the trailer from the side: it should sit level or very slightly nose down. Keep a pair of jumper cables in the truck in case the trailer battery or tow vehicle needs help on the road.
Grease the ball lightly, or use a ball cover, to reduce wear and noise. Remove long drop mounts when you are not towing so they do not catch on curbs or hit your shins. Every few months, check the bolts that clamp the head to the shank and tighten them to the torque in the manual. For roadside work on the trailer, a good floor jack makes tire changes far easier.
A Scenario Worth Knowing About
Picture a new truck owner who buys a ball mount rated for 18,500 lbs and decides they can tow a 12,000 lb equipment trailer with their half-ton pickup. The ball mount is fine. The receiver, however, is a 2 inch Class IV rated for 10,000 lbs, and the truck’s owner’s manual lists a lower tow rating than that in the configuration they have. On the first steep grade the truck labors, the brakes heat up and the trailer pushes the truck around in a crosswind.
Nothing broke, but every part between the truck and the trailer was working past its limit except the ball mount. The fix is simple: start with the vehicle’s tow rating and the receiver sticker, then choose a ball mount that meets or beats those numbers. A high rating on the hitch is a safety margin, never a reason to tow more.
Frequently Asked Questions
What is the best heavy duty trailer hitch?
For heavy duty trucks with 2.5 inch receivers, the VEVOR 8 inch drop dual ball mount rated at 28,000 lbs on its 2-5/16 inch ball is our top pick. For half-ton trucks and SUVs with 2 inch receivers, the matching 2 inch, 8 inch drop model is the better fit.
How do I know how much drop I need?
Measure from the ground to the top of the receiver opening, then from the ground to the bottom of the coupler with the trailer level. The difference is the drop. Choose a mount that covers that number with a little to spare, since the truck will squat under the tongue weight.
Does a higher rated ball mount let me tow more?
No. Your limit is the lowest rating among the vehicle, receiver, ball mount, ball and coupler. A high rated ball mount simply means it is unlikely to be the weak link.
Can I use these hitches with a weight distribution system?
These hitches are not marketed for weight distribution, and VEVOR says the balls on the 28,000 lb model are welded and cannot be replaced with a weight distribution ball. If you need weight distribution, use a hitch head made for that system.
Should I leave an adjustable hitch in the receiver?
It is better to remove it when you are not towing, especially a long drop mount. It can catch on curbs and ramps, hit people walking behind the truck and rust in place in the receiver. A light coat of grease on the shank makes removal easier.
What else do I need for towing?
Safety chains, a breakaway cable, working trailer lights and the right ball size are the basics. Add a trailer jack for hitching, heavy duty ratchet straps to secure the load and a hand truck for moving heavy gear in and out of a cargo trailer.
The Bottom Line
For heavy duty pickups with 2.5 inch receivers, the VEVOR 8 inch drop dual ball hitch is the trailer hitch we would buy, with ratings of 20,000 and 28,000 lbs and a tough steel build. Lifted trucks should step to the 10 inch drop model, while half-ton trucks and SUVs with 2 inch receivers should choose the 2 inch, 8 inch drop version.
The 8 inch tri-ball hitch is the one for owners who tow several different trailers, and the compact 6 inch drop tri-ball hitch suits stock-height trucks and SUVs with 2 inch receivers that only need a small adjustment. Whatever you choose, measure your drop, respect the lowest rating in the chain and check your pin and chains before every trip. We will add more brands to this page as we review them.